ACCAP3考试模拟真题答案

时间:2020-10-04 15:07:04 ACCA 我要投稿

2016年ACCA(P3)考试模拟真题答案

>>>点击查看原试题
  Tutorial note: the financial ratios given in the following analysis have been calculated using definitions specified in Accounting and

  Finance by Peter Atrill and Eddie McLaney. Correct, acceptable alternative ratio calculations will be given credit.

  1 (a) The following financial analysis focuses on the profitability and gearing of Hammond Shoes manufacturing division.

  Profitability: The effect of cheap imports appears to be reflected in the profitability of the company. Revenues and gross profit

  have both fallen significantly in the four years of data given in Figure 1. In 2007 the company reported a gross profit margin

  of 23·5% and a net profit margin of 8·2%. This has declined steadily over the period under consideration. The figures for

  2009 were 20·0% and 4·7% and for 2011, 17·9% and 2·9% respectively. There has been a general failure to keep costs

  under control over this period. Sales have fallen by $150m in four years – almost an 18% decrease. In contrast the cost of

  sales has decreased by only $75m, a decrease of about 11·5%. This probably reflects the problem of reducing labour to react

  to lower demand, particularly in a country where generous redundancy payments are enforced by law and in an organisation

  which sees the employment of local labour as one of its objectives. The Return on Capital Employed (ROCE) has dropped

  substantially, from 24·14% in 2007 to 6·45% in 2011.

  Gearing: The capital structure of the company has changed significantly in the last four years and this is probably of great

  concern to the family who are averse to risk and borrowing. Long-term borrowings have increased dramatically and retained

  earnings are falling, reflecting higher dividends being taken by the family. Traditionally, the company has been very low

  geared, reflecting the social values of the family. The gearing ratio was only 6·9% in 2007, but has risen to over 22·5% in

  2011. During this period, retained profit has fallen and an increasing number of long-term loans have been taken out to

  finance activities. Overall, gearing may still appear quite low and indeed this is probably the view of the senior management

  of the company. However, the speed of these funding changes is a concern, particularly when trade receivables and trade

  payables are considered.

  One of the values held by the family is the importance of paying suppliers on time. In Arnland, goods are normally supplied

  on 30 days credit. In 2007, Hammond Shoes, on average, exceeded this target, paying on 28 days. However by 2009 this

  value had risen to 43 days and by 2011 to 63 days. During the same period, trade receivables, from the selected data

  provided, appear to have come down slightly (from 38·65 days in 2007 to 36·50 days in 2011). It is difficult to escape the

  conclusion that Hammond Shoes is increasingly using suppliers as a source of free credit on top of the loans they have taken

  from the banks. Financing costs have risen significantly over the last four years, affecting profits and also causing the interest

  cover ratio to fall dramatically from 14 to 1·33.

  The financial analysis essentially supports the descriptive analysis provided by the business analysts. Profits are falling, with

  the firm unable to cut costs sufficiently quickly. The company is increasingly dependent on external finance which is likely to

  cause disquiet amongst the owning family (on ethical grounds) and may concern suppliers.

  Investment analysis:

  The two scenarios developed by the senior managers also reflect the pessimism of the company. There seems to be universal

  acceptance that in the next three years the company will still experience low sales even after the company invests in the new

  production facilities. Beyond that, managers only see a 30% chance of higher sales resulting and this depends upon

  favourable changes in the business environment.

  For both scenarios, the net benefits of the first three years are $5m per year, giving a total of $15m.

  For the next three years, managers suggest that there is a 0·7 chance of continuing low demand, leading to net benefits

  staying at $5m per year, giving a further benefit of $15m total, with an expected value of $10·5 ($15m x 0·7). Higher

  demand would lead to net benefits of $10m per year, providing a total of $30m, but with an expected value of only $9m

  ($30m x 0·3).

  Thus the expected benefits of the project are only $34·5 ($15m + $10·5m + $9m), which is below the proposed investment

  of $37·5m. Only if the second scenario materialises after three years will the investment (in broad terms) have been justified.

  This scenario would return $45m.

  However, it has to be recognised that the projection only covers the first six years of the new production facilities. The factory

  was last updated twenty years ago and so it seems reasonable to expect net profits to continue for many years after the six

  years explicitly considered in the scenario, but it must be recognised that predicting net benefits beyond that horizon becomes

  increasingly unreliable and subjective.

  (b) This question does not require the candidate to use a specific framework for generating strategic options. A number of

  possibilities exist. The TOWS matrix, the strategy clock and the Ansoff matrix all come to mind. Each of these frameworks has

  sufficient facets to generate the number of options or directions required to gain the marks on offer. For the purpose of this

  answer, the TOWS matrix is used, because it fits so well with the SWOT analysis produced by the consultants. However, the

  focus is on the options generated, not the framework itself and so other frameworks may be as appropriate.

  The TOWS matrix is a way of generating directions from an understanding of the organisation’s strategic position. It builds

  directly on the work of the SWOT with each quadrant identifying options that address a different combination of the internal

  factors (strengths and weaknesses) and external factors (opportunities and threats).

  Taking each quadrant in turn:

  SO – using strengths to take advantage of opportunities. A number of possible options might be considered here. Hammond

  Shoes’ retail expertise is an acknowledged strength of the company, and it may be possible to use it to take advantage of the

  opportunities provided by increased consumer spending and consumerism in Arnland. Two possible options come to mind.

  Firstly, the company could consider selling competing products or complementary goods in its retail shops. This would give

  consumers a greater choice of products and allow Hammond Shoes to reap some of the profit margins enjoyed by its

  competitors. Given the company’s acknowledged retail expertise, this option should help preserve the long-term future of the

  shops.

  Secondly, the increasing appetite of the public for safe, car-free shopping from a variety of shops might suggest the

  development of retail ‘villages’ on the land that Hammond Shoes have, both in Petatown and in the, now disused, factory in

  the north of the country. This option would combine the twin strengths of retail experience and the availability of land owned

  by the company, to provide consumers with an experience they increasingly seek and value. The fact that only two sites are

  available in towns where there are currently no Hammond Shoes retail shops means that there is no apparent reason why

  the creation of the retail villages should not be combined with the diversification of the products offered in the retail stores.

  The software expertise of the company’s information systems department can also be used to fulfil consumer’s desire for

  increased purchases over the Internet. Up to now this software expertise has been mainly used to develop in-house production

  and retail systems which are acknowledged as being amongst the best in the industry. This expertise might be used to develop

  an innovative e-commerce site. This, of course, also opens up the possibility of sales outside Arnland, something that is

  unlikely at the moment, given that all the retail shops are within the country.

  WO – options that take advantage of opportunities by overcoming weaknesses. To some extent this option contains the

  approach suggested by the Board, upgrading production machinery. This is addressing a known weakness (out-dated

  production facilities), simultaneously tackling another weakness, the cost of production. Here the approach is to reduce unit

  cost by improving productivity and reducing energy costs through the use of modern production equipment. The Board

  perceives that overcoming these weaknesses will allow the company to continue to compete in the market they are familiar

  with.

  Reducing energy costs might also be used to appeal to the increasing number of green consumers of Arnland who take into

  account ethical issues when making purchasing decisions. The business analysts have identified these savings as an

  opportunity in their SWOT analysis. They should be attracted to a product that has been produced using an energy efficient

  process, and has not travelled thousands of kilometres (using energy consuming boats, road transport and trains). At the time

  of writing, there is an increased interest in measuring product miles or kilometres, a term used to assess the environmental

  impact of delivering a product from its point of production to its point of sale. Although the measures are controversial, this

  need not necessarily concern the messages put out by Hammond Shoes’ marketing department.

  Hammond Shoes might also use the negative impact of television programmes showing the use of cheap and exploited labour

  in the production of goods in Orietaria as part of their marketing message. Although the consultants have suggested that the

  production of shoes in Arnland is a weakness (because of high costs) it could be turned into a strength if the country of origin

  becomes an important part of the buying decision for people who are willing to pay a premium for ethically sourced products.

  This might be supported by political initiatives, for example, the support of one of the political parties in Arnland for

  environmentally responsible purchasing. Their manifesto suggests that ‘shorter shipping distances reduce energy use and

  pollution. Purchasing locally supports communities and local jobs’.

  ST – options that use strengths to avoid threats. The company is an acknowledged leader in shoe design and distribution

  software. It also has significant retail competencies. The company might consider reviewing these to see whether innovative

  production and retail systems could not be combined and extended to provide economies of supply that partly compensate

  for the relative high cost of production. So, although production costs cannot easily be reduced, supply and storage costs

  might be.

  The extensive property ownership of the organisation is also perceived as a significant strength. In the short term there may

  be an opportunity to buy time whilst the cost of producing overseas increases due to rising fuel costs and demands for better

  pay in the producing countries. Thus, cheaper competition might be seen as a short-term threat, which will eventually

  disappear. The property portfolio could be used to help finance Hammond Shoes through this period. It might do this by

  disposing of property, or perhaps more innovatively, by selling all of its property and leasing it back. This would provide

  liquidity which could be used to ease the company through the next few years.

  WT – options that minimise weaknesses and avoid threats. The high cost of labour (weakness) and the continued provision

  of cheap imports (threat) may mean that Hammond Shoes should consider diversifying into areas of the footwear market

  where there is either less demand for raw materials or where a premium can be charged, either due to the quality of the

  product or due to appropriate branding. For example, focusing on shoes for children, which requires greater precision and

  16less raw material, might be a possibility. The attraction of this is that it is a product which needs regular renewal (as feet

  grow) and because parents are conscious of getting exactly the right fit to avoid permanent damage to their children’s feet.

  The acknowledged strengths of the retail experience, where employees have extensive product knowledge and excellent

  customer care, might also be harnessed to support this approach. Branding can reinforce the message, focusing on Hammond

  Shoes as primarily a supplier of children’s shoes. Adult shoes may be given a lower marketing profile, but are available for

  cross-selling when parents are visiting for measuring and fitting shoes for their children.

  Other niche areas might include high quality fashion shoes and boots, where customers are willing to pay a premium for the

  product. This might demand a certain amount of exclusivity, reinforced through appropriate marketing. Again, one of the

  attractions of the fashion market is the relatively short shelf-life of the product. Many consumers wish to renew their shoes

  each season as a fashion statement, not due to any desire to keep their feet dry and clean.

  (c) A mission statement defines the overriding direction and purpose of an organisation. Some organisations also have vision

  statements stating what the company aspires to. However, for the purpose of this answer, vision and mission are perceived

  as largely the same thing. Mission statements have their critics, with many believing that they are bland and too wide-ranging.

  There may be some truth in this view; after all there are only a limited number of ways that the words customer, quality and

  leader can be re-arranged. However, most organisations appear to have settled into an approach where a short snappy slogan

  or strap line is supported by a much deeper description of what the organisation is about, its stakeholders and how it wishes

  to interact with those stakeholders. It defines how the organisation wants to do business. At the time of writing Virgin Atlantic

  has three elements to its mission statement, all expanded into specific objectives on its website. To grow a profitable airline,

  where people love to fly and where people love to work. Part of ACCA’s mission is to provide opportunity and access to people

  of ability around the world and to support our members throughout their careers in accounting, business and finance.

  If there is substantial disagreement within the organisation about its overall mission then there may be significant problems

  in determining the strategic direction of the organisation. Defining a mission statement also provides an opportunity for the

  organisation to communicate its core corporate values. These may be explicitly defined within the mission itself or they may

  be in subsidiary statements, corporate reports or web resources. These values tell customers and suppliers how the

  organisation wishes to operate. They represent the core values and principles that guide the organisations’ actions. These

  could, for example, concern aspects of corporate social responsibility. The ACCA has core values of opportunity, diversity,

  innovation, accountability and integrity.

  One of the problems at Hammond Shoes appears to be that the core values of the organisation are implied, but not explicitly

  stated. Originally, these were provided by the beliefs of the founding brothers – provision of education and housing for

  employees, secure jobs and good working conditions. Privately, the family still have these principles but they have largely

  failed to communicate and promote them. Commercial organisations with important core social values are increasingly rare.

  The extent of this communication failure at Hammond Shoes even extends to the senior management of the company. Their

  promotion of the potential benefits of outsourcing of production indicated a failure to understand that this would effectively

  remove a significant part of the company’s reason for existence. Its core values include the provision of fair employment

  opportunities for the people of Petatown and the reaction of the family to removing this central mission illustrates that this

  value remains core to the continued existence of the company.

  Thus the Hammond family should explicitly state their core values, perhaps as a detailed expansion of a short, clear mission

  statement. This would allow the family to articulate its beliefs and communicate these to customers, suppliers and employees.

  A number of writers on organisations use a MOST analysis to help understand the internal environment of an organisation.

  MOST stands for Mission, Objectives, Strategy and Tactics. The aim of this analysis is to see whether the four facets actually

  exist (checking for omission) and, if they do, whether they align. Objectives are statements of specific outcomes that the

  organisation wishes to achieve. They are often expressed in financial terms, such as profit levels, turnover or dividend

  distribution to shareholders. Marketing objectives are also very common; such as a target market share and customer service

  provision. Johnson, Scholes and Whittington also believe that general, unquantifiable objectives are acceptable. They

  recognise that objectives such as ‘being a leader in technology’ is important to state, but could be difficult to quantify and

  may indeed encourage spurious quantification. In the context of Hammond Shoes, the company does appear to have certain

  objectives, such as keeping production in Petatown and providing educational opportunities for employees. As Johnson,

  Scholes and Whittington point out, ‘there are times when specific objectives are required’. This is when urgent action is

  necessary, as at Hammond Shoes, when it becomes important for the management to focus on a limited number of

  quantified, priority requirements and not waste their energies pursuing vaguely stated ones.

  Furthermore, the existence of such objectives provides an opportunity for managers and employees throughout the

  organisation to align their own work with stated objectives and so see how what they do contributes to objectives that, in

  turn, serve the corporate mission. The company clearly fails to cascade objectives down through the organisation and, again,

  at a period of crisis, this may be a significant weakness. For example, the core value of treating suppliers fairly could have

  been enshrined within an objective of paying all suppliers within 30 days. The absence of this specific objective and hence

  the impossibility of cascading it down to those responsible for cash flow management and payment has meant that this

  section has imposed its own objective of extending payment terms as much as possible. Evidence suggests that they now

  stand at over 60 days, so the company is failing to meet one of its core values – fairness to suppliers.

  Hence, Hammond Shoes does not have a clearly defined mission or explicitly stated values. Its objectives are restricted and

  rarely quantified. Its strategy is now under review, although it has made certain tactical decisions such as resisting outsourcing

  and commissioning updated production facilities in Petatown. Thus in the MOST analysis, there are some elements omitted

  and hence alignment is impossible. This needs to be addressed.

  172 (a) A critical evaluation of using the software package approach at Flexipipe could be structured around three factors. The first

  concerns the wisdom of using a package solution for a process where the company enjoys a competitive edge over its

  competitors. The second factor focuses on the difficulties of selecting an appropriate package in an environment where

  requirements are difficult to define and are still subject to change. The final factor revolves around the problem of successfully

  procuring a software package in an organisation which lacks both experience and a process for selecting and procuring a nonstandard software application. Each of these factors is now considered in turn. Other appropriate factors and relevant

  approaches will be given credit.

  Competitive edge

  It is generally accepted that software package solutions cannot provide organisations with a competitive edge. By definition

  such packages are available to all companies in a sector or market and so any commercial advantages offered by the package

  are available to all organisations competing in that market.

  It is recognised that the control of the production process at Flexipipe was very innovative. It provided the company with

  significant competitive edge over their competitors. For this reason, it seemed unlikely from the start that Flexipipe would find

  a package that fulfilled its exact requirements and that any selected package would constrain the production process. Indeed,

  this is what happened, with the new system unable to replicate the flexibility and efficiency of the existing one.

  Initially, the company would have been advised to consider the location of the process on the Harmon process/strategy grid.

  The process is strategically important and relatively complex. Software package solutions should primarily be considered for

  reasonably straightforward commodity processes which have low strategic importance to the company, such as payroll and

  accounts. Thus, in the context of Flexipipe, a bespoke software solution would, from the outset, appear to have been more

  appropriate.

  Complexity and nature of requirements

  It was recognised from the start that it was relatively difficult to specify all the requirements of the production process in

  advance because many decisions were intuitively taken by experienced managers and supervisors on the factory floor. It was

  often difficult for them to explain why they had taken certain effective decisions. It is very risky to select a software package

  against incomplete or unarticulated requirements. If significant requirements are missed or misunderstood then it is difficult

  to address the problems this might cause.

  There are at least three potential approaches to addressing the problem of the software failing to fulfil requirements, but each

  of these has disadvantages. The first approach is to ask the software vendor to integrate these requirements into the next

  release of the package. However, even if the software vendor agrees, it may be a costly solution as well as allowing such

  innovations to become available to all users of the package. The second approach is to ask the software vendor to build a

  tailored version of the application to fulfil specific requirements. This is likely to be expensive (so reducing the cost advantages

  of buying a package) and cause long-term maintenance problems and costs as the tailored version has to be integrated with

  new releases of the standard software package. The final approach is to seek a manual work-around for the missing

  requirements. However, this may also be costly as well as reducing the business benefits which should have been obtained.

  Whichever approach is taken, it is likely to either reduce the benefits or increase the costs of adopting a software package

  solution.

  It was also recognised that requirements are likely to change in the long term. There is no guarantee that the software vendor

  will develop the package to fit newly emerging requirements and so the issues of tailoring and work-around will again have

  to be considered. Most package selection takes place against current requirements and so this approach is well-suited to

  circumstances where requirements rarely change and, if they do, they are specified by legislative bodies and the software

  vendors must make the changes to keep their product compliant. Payroll and integrated accounts applications are typical of

  this. Applications that are subject to long-term changes (such as the production process at Flexipipe) and do not require

  legislative compliance, are less appropriate to this approach.

  Absence of mature procurement process and management expertise

  It was recognised from the outset that Flexipipe did not have an established process for software package selection and

  implementation. This was a very risky project in which to try and establish a process and select an appropriate package. Lack

  of procurement expertise in general has been a problem in the past for the company when a key supplier of raw materials

  for the pipes went out of business. This caused short-term production problems, although an alternative supplier had

  eventually been found. However, procurement still only employs two people full-time and they are relatively junior and overworked. The company appears to have a very immature procurement process.

  The long-term commitment to an external supplier is very problematic in software supply, where moving formerly in-house

  applications to a new supplier can be technically difficult, expensive and disruptive. In general, there are significant risks

  associated with the long-term viability of software suppliers and the maintenance of software applications that are critical to

  the company. Companies go out of business, as in the case study scenario, and companies are sold. It is feasible that a

  software supplier might be bought by a competitor of Flexipipe, threatening long-term supply. These problems are largely

  absent in bespoke development, particularly if this development is undertaken in-house. The software program code belongs

  to the company (not the supplier) and its long-term development is under its control.

  (b) In the context of the Flexipipe project, here are some of the issues that could have been addressed by a formal software

  package evaluation process. It is important that candidates identify elements of the process relevant to the Flexipipe scenario.

  A generic evaluation process is insufficient.

  18The business case for all software procurement projects should be assessed to see if a package is an appropriate solution.

  In some instances a bespoke IT development may be better suited. As mentioned in the answer to the first part of this

  question, the Harmon grid considers process complexity and strategic importance and it could have been used as a guide to

  assessing the appropriateness of the software package solution approach. If it had been used at Flexipipe then it seems likely

  that the software package approach would have been abandoned at an early stage of the project.

  The requirements must be carefully and comprehensively specified before embarking on a procurement exercise. Difficulties

  with specifying requirements may again lead to a re-consideration of the bespoke approach. In the case study scenario,

  mention is made of the system failing to fulfil a number of functional requirements, such as monitoring process variance. The

  inference is that these requirements were either not specified or were incorrectly specified in advance and so were not part

  of the package assessment. Similarly, problems with ‘usability’ may be due to the failure of defining specific usability

  requirements in advance and so these were not considered when the package was evaluated.

  The tendering method has to be made more formal and competitive. A post-project review has shown that there were at least

  three other packages which should have been considered in the evaluation process. A more formal process would have had

  a mechanism for finding these potential suppliers. The openness of the tendering process would also have been assisted by

  advertising in trade magazines and internet tendering sites, which may have also brought forward other potential suppliers.

  This is an important step because it allows a transparency in the process, and avoids selecting a supplier purely on the

  recommendation of one internal employee: as in the case of Flexipipe. It would have avoided the situation of a package being

  selected solely on the basis of a visit to an exhibition.

  Suppliers who submit tenders must be evaluated against criteria agreed in advance. Buying a software package leads to a

  long-term relationship between the supplier and the customer, so the latter must be comfortable with the supplier’s

  credentials. In the context of Flexipipe this would involve setting standard measures and minimum values for liquidity, gearing

  and profitability. There also has to be some way of off-setting the supplier’s suitability with the suitability of the product. That

  is, how a package with limited functionality from a well-established, financially sound supplier is evaluated against a more

  functional, usable package from a newly established company with high financial gearing and low turnover. The balance

  between such factors has to be established in advance, often using a high-level weighted matrix. In the context of the

  scenario, appropriate financial checks should have identified the high gearing and poor liquidity of the supplier that eventually

  led to its collapse.

  A proper process also needs to be in place to evaluate the potential solution against the specified requirements. It is

  important to establish the ‘fit’ between the requirements and the potential solution and to use this ‘fit’ in the final selection.

  It has been stated elsewhere that it is unlikely that a package solution will exactly fulfil all requirements. However, if the ‘fit’

  is known and understood in advance then negotiation with users may lead to them dropping, modifying or finding workaround for these gaps. Perhaps some of the functional shortcomings identified by users might have been tolerated, if they had

  been known and understood in advance.

  Finally, a planned implementation is an important part of the process. Perhaps the lack of usability of the software was down

  to the absence of training and the belief that users could ‘to pick up the software as they go along’. This is a risky approach,

  even in circumstances even with experienced users and in a situation where the software product is a good fit with their

  requirements.

  3 (a) Meetings were held throughout the design and construction of the centre. These meetings focused on the building of the

  centre, monitoring progress and resolving minor issues that arose during construction. The successful completion of the centre

  on budget and ahead of schedule suggests that these meetings were effective. However, the absence of a wider project

  initiation document or terms of reference created problems that could have been resolved or better understood. An analysis

  of how a standard document could have helped address some of the issues that affected the construction and subsequent

  evaluation of the centre is given below.

  There was confusion about the objectives of the project. The local authority is unable to recognise the distinction between

  project objectives and business objectives. The business objective of the project was to deliver payback in four years as

  required by the Private/Public investment policy. In contrast, the project objective was to build the centre by June 2011 for

  $600,000. By their very nature, the business objectives are not within the control of the project manager from the

  construction company responsible for building the centre. The achievement of the business objectives will involve much more

  than just delivering a building. They will concern marketing, sales and the successful operation of the centre. Evidence seems

  to suggest that the project manager was not (as the second project sponsor claimed) a failure. He delivered the building within

  budget and ahead of schedule. The problem was the failure of the local authority to distinguish between the project objectives

  (constructing the building) and the wider business objectives which the building was to help satisfy. It appears that nobody

  was either aware of, or willing to take responsibility for these wider objectives. It is recommended that future projects should

  clearly distinguish between project and business objectives and assign responsibilities to each.

  The scope of the project was well-defined by the standard architectural drawings agreed between the construction company

  and the project sponsor. The only significant problem concerned the quality of the internal painting. There is no way (post

  project) of reconciling this misunderstanding. The construction company felt that it had come to an arrangement about this

  with the initial sponsor, but no documentation could be found to irrevocably support this. The letter confirming the intended

  finish produced by the construction company was not counter-signed by the project sponsor. This is an important lesson for

  the construction company in future projects. Changes or clarifications to the specification must be counter-signed by both

  parties. This is also appropriate to the local authority’s project management methods, continuing to demand that all changes

  must be counter-signed by both parties.

  19The constraints of the project were relatively well-defined in terms of time and cost, as these were defined in the original

  business case. However, tension was caused within the project when it became clear that certain labour and sourcing

  requirements of the Private/Public policy were not being adhered to. Specifically, these concerned the use of sub-contracted

  labour (not to be used without the commissioning agency’s permission) and sourcing at least 80% of timber on the project

  from sustainable forests. The generic terms of the Private/Public investment policy were not made available to the construction

  company. It is suggested that the local authority should, in future, integrate such objectives explicitly into the project terms of

  reference.

  The authority of the project is the sponsor responsible for making decisions about the project, providing resources, considering

  and agreeing changes. They should also promote the project within the local authority and accept the project once it has been

  completed. The original sponsor on the local authority was very supportive of the centre’s design but their successor seemed

  unsure of her responsibilities and focused on obtaining concessions from the suppliers under the pretext of ‘value for money’

  rather than considering the wider issues, such as defining who had responsibility for delivering the business objectives. She

  also failed to promote the project to her fellow employees and tried to blame the builders for the failure. The role of the project

  sponsor should be formally defined within the local authority. Their responsibilities should be clear and failure to adhere to

  those responsibilities should be addressed.

  The resources available to the project were relatively well defined, although the lack of local authority staff able and willing

  to discuss disability access meant that the contractors had to use their own initiative in this area. Fortunately for them, they

  interpreted legal requirements correctly and the delivered centre was deemed to be compliant with legislation. However, this

  is a risky approach and is not recommended for the future. Local authority resources and support required by projects should

  be specifically defined in advance. If they are unavailable during the project then substitutes must be provided.

  (b) This part of the question evaluates the four sets of benefits identified in the payback calculation. It requires the categorisation

  and critical evaluation of each benefit.

  Ward and Daniel use the term ‘observable benefits’ to describe the least explicit benefits such as increased staff morale in

  the case of the community centre. They suggest that such benefits should be assessed against clear criteria by someone who

  is qualified to make such an assessment. So, for example, current staff morale and motivation might be assessed in an

  independent survey and compared to results from a similar survey conducted once the centre has been built and occupied.

  In the context of the centre it might seem reasonable to assume that improved staff morale and motivation will have a positive

  effect on the success of the centre. For example, it may lead to better customer service, which may, in turn, lead to customers

  returning more often or using more facilities whilst they are there. It may also lead to reduced staff turnover, so decreasing

  costs associated with recruitment, induction and training.

  However, from a benefits perspective, two issues have to be specifically addressed.

  Firstly, the relatively significant estimated benefits attributed to improved staff morale in the original payback calculation must

  be questioned. In terms of increased benefits it is difficult to disentangle benefits due to this from other factors which might

  lead to increased customer use. In terms of reduced recruitment costs, there is little to suggest that staff turnover is high at

  the moment. 80% of the staff has been with the centre for over five years and there is an economic recession in the country,

  with unprecedented unemployment.

  Secondly, and perhaps more fundamentally, the whole basis of the benefit needs further consideration. It is unclear why

  moving to the new centre would necessarily improve staff morale and motivation in the first place. There may be some

  intellectual support for the view that a pleasant working environment contributes towards motivation, but, in the initial stages

  the centre is likely to have temporary teething problems leading to (at least in the short term) a more stressful work

  environment. Similarly, even if a survey found that morale and motivation had increased it would be hazardous to attribute

  this to the investment in the centre as it may be largely due to external factors affecting each individual.

  A measurable benefit is one where an aspect of performance is currently being measured or could be measured. However,

  it is not possible to estimate with any certainty, in advance, how much performance will improve when the changes are

  completed. In the context of the centre, increased income seems a reasonable measurable benefit. It seems reasonable to

  expect that current income is measured and that similar measures may be collected in the future.

  The estimates on the payback calculation need further scrutiny, particularly the large increases predicted for years three and

  four. It should be acknowledged that few benefits are instantaneous and that use will only increase as the reputation of the

  centre grows. However, this growth in customer use is not associated with any increased costs which would seem unlikely.

  Hence, the basis of these benefits requires further investigation.

  A quantifiable benefit is one where there is sufficient evidence to forecast how much improvement or benefit should result

  from the proposed changes. In such circumstances the level of performance prior to the change is known and the

  improvement can be specifically attributed to the investment, rather than to other changes. Energy savings appears to fit into

  this category. Energy use could be established for the current building. The Private/Public investment policy requires buildings

  constructed under this arrangement to meet specified target energy levels. The construction methods and design of the

  building should reflect the need to meet this target. Thus there is a good basis for predicting energy savings, although, of

  course, the actual savings will not be known until after implementation.

  Finally, a financial benefit is one where a financial value can be obtained by applying a cost, price or any other valid financial

  formula to a quantifiable benefit. Thus we might re-classify the quantifiable benefit of energy savings as a financial benefit,

  assuming that the new building meets the minimum level required by the initiative. There are still important assumptions

  20here, and the real performance can only be assessed after the building has been used for a while. There is still an element

  of estimation, and indeed the new building may surpass the minimum levels assumed in the cost/benefit analysis. In contrast

  rental savings on the current properties are both definite and immediate and are correctly recorded in the payback calculation.

  In summary, the benefits in the payback calculation should probably have been initially restricted to financial and quantifiable

  benefits. The other benefits are important and should have been documented in the business case, but it seems inappropriate

  to artificially quantify these benefits to satisfy the need to achieve a payback target. However, if the measurable benefits are

  included in the business case, their underlying assumptions and probability should be communicated to the decision-maker.

  Furthermore, efforts might also be made to better estimate the likely benefits, perhaps through looking at performance in

  similar centres, and using this as a benchmark to elevate the benefits to being, at least, quantifiable.

  4 (a) The value chain was introduced by Michael Porter as a way of examining all the activities a firm performs and how these

  activities interact. By understanding the value chain the analyst can understand costs and identify existing and potential

  sources of differentiation. The value chain of the organisation is concerned with creating value for customers. A firm is

  profitable if the value it commands from the customer exceeds the costs involved in creating the product or service that

  delivers that value.

  The primary activities of the value chain are the activities required to physically produce the product, get it to the customer

  and provide that customer with after-sales service and assistance. Support activities provide organisation-wide functions (such

  as procurement and technology) to support the primary activities. In general, they support the whole value chain.

  In the context of Jayne Cox Direct, the primary activities and their problems are:

  Inbound logistics – activities associated with receiving, storing and distributing inputs to the product. This includes

  warehousing, inventory control and raw materials. At Jayne Cox Direct this concerns wood, upholstery, textiles and other raw

  materials. It concerns the storage of these raw materials before they are used in production. At Jayne Cox Direct there are

  documented problems with the e-mail purchase ordering system, which has led to the non-delivery of an expected order. High

  inventory levels are also commented on in the scenario and these need further investigation.

  Operations – activities concerned with transforming the inputs into their final form; machining, packaging, assembly and

  testing. At Jayne Cox Direct this is the production process of furniture manufacture. Despite high inventory levels and a

  relatively slow production process, almost half of the promised delivery dates are not achieved. The reasons for this again

  need further investigation. Perhaps the method for estimating the delivery date is too optimistic. Alternatively, there may be

  inefficiencies in the production process which need addressing. As well as disappointing customers, failure to meet the

  proposed delivery date causes increased administrative costs, as a member of the sales team has to contact the customer

  and rearrange the delivery date.

  Outbound logistics – activities associated with storing finished goods and physically distributing these to the customer. At

  Jayne Cox Direct this is the storage of completed furniture and the delivery of furniture, using their vans, to customers. The

  cost of storing of finished goods is exacerbated by the need to store them longer than is necessary. There are two reasons for

  this. The first is concerned with customers not being able to meet revised delivery dates and so deferring delivery. The second

  reason is the return and storage of goods where delivery cannot be made because the customer is not at home to sign for

  them. Storage of finished goods increases inventory holding costs. Failed deliveries increase administrative costs (a member

  of the sales team has to telephone customers to re-arrange the delivery) and distribution costs (the delivery has to be made

  again).

  Marketing and sales – activities that allow a buyer to become aware of a product, induces them to purchase this product and

  supports the actual purchase of the product. At Jayne Cox Direct this is achieved largely by display advertising in quality

  magazines and through a web-based ordering system. The sequence of the web-based ordering system may repay

  investigation and amendment. The estimated delivery time is given after the order has been placed and this causes some

  customers to immediately cancel their orders. It is perhaps unlikely that such customers will return to place orders with Jayne

  Cox Direct.

  Servicing – activities that enhance or maintain the value of the product, including repair, parts supply and product adjustment.

  At Jayne Cox Direct this would concern replacement of faulty or spoilt goods, complaints handling and product care

  information. Customers are critical of after-sales service at Jayne Cox Direct and the managing director believes that this

  contributes to low customer retention.

  The value chain also considers a number of secondary or support activities. Only one of these is specifically relevant in the

  context of the Jayne Cox Direct scenario.

  Procurement refers to the function of purchasing inputs used in the organisation’s value chain. It does not refer to the

  purchase inputs themselves. The cost of the procurement function may be relatively small, but their practices greatly affect

  the quality and cost of the final product. At Jayne Cox Direct, the cost of wood, upholstery and textiles will be an important

  determinant of the product cost. The long-term arrangement with suppliers needs investigating. Three timber suppliers provide

  95% of the wood. Such arrangements may lead to suppliers becoming comfortable and progressively uncompetitive.

  (b) This question is primarily concerned with re-examining the upstream and downstream supply chains to explore opportunities

  for reducing cost, improving order-to-delivery time, improving delivery practices and enhancing customer service. Clearly there

  are many possibilities. Candidates, however, will only be given credit for suggestions that use technology (rather than

  organisational changes) and that are clearly relevant to the case study scenario and the products it concerns.

  21Upstream supply chain solutions

  The upstream activities concern selecting suppliers (procurement), placing orders (procurement) and storing raw material

  inventory (inbound logistics). Dave Chaffey identifies six main challenges in the supply chain. Three of these six are relevant

  to Jayne Cox Direct.

  – Reduce order-to-delivery time

  – Manage inventory more effectively

  – Improve demand forecasting

  Suggestions for improvement might include:

  As mentioned in the answer to the first part of this question, procurement continually uses the same long-established suppliers

  (for example, 95% of timber comes from three established suppliers). These suppliers may have become complacent and

  uncompetitive. The company might consider using e-procurement websites to identify a wider range of suppliers and then

  select between these suppliers on the basis of cost and quality when placing individual orders. Such an approach should help

  drive down raw material costs and re-focus the costs and service offered by the established suppliers.

  Although the purchase orders are placed through email, the ordering process is relatively cumbersome with suppliers

  occasionally failing to respond to emails or, when an expected delivery is not received, claiming they did not receive them in

  the first place. The payment system (operated by accounts) sometimes fails to match purchase orders with supplier invoices,

  leading to delayed supplier payment and discontent. The company might consider a new system to administer purchasing

  and payment, linked electronically (through EDI) to the suppliers, so that orders are automatically entered into the supplier’s

  system and all invoice reconciliation and payment is performed electronically. This may require the company to continue to

  trade with a selected number of small suppliers, but it should help avoid non-delivery, reduce administrative costs and

  improve supplier relationships.

  To avoid delays through inventory shortages, linkage with supplier systems might be increased by allowing suppliers to see

  the demand for certain products so that suppliers can, to some extent, anticipate demand and so should be able to supply

  more quickly. This would require further investigation and it seems likely that it would work better for certain raw materials

  than others. For example, the textile suppliers would be able to see the relative demand for different patterns and adjust their

  production accordingly. This should lead to Jayne Cox Direct achieving a higher percentage of planned customer order dates,

  as well as reducing delivery lead time.

  Increased integration also brings the promise of better inventory management, with the opportunity of suppliers effectively

  producing to order rather than to stock, which is, in effect, an extension of what Jayne Cox Direct is doing. Closer integration

  of customer and supplier systems also provides the opportunity for ‘just in time’ manufacture where raw materials arrive just

  before they are needed in the production process. Although this transfers inventory costs to suppliers, more understanding of

  demand should mean that suppliers’ inventory management is also more effective. Reduced inventory costs for the supplier

  might also be passed on to Jayne Cox Direct, resulting in lower input costs. An understanding of demand and the relative

  costs of storage and ordering should also allow Jayne Cox Direct to implement systems that optimise order quantities (the

  EOQ model).

  Downstream supply chain solutions

  Downstream supply to customers is relatively simple as there are no intermediaries, as the company supplies directly to the

  consumer. However, evidence suggests that some consumers are relatively disaffected. A further challenge cited by Dave

  Chaffey is relevant here, the need to improve aftersales/post-sales operations (service on the value chain). The company also

  needs to consider the costs of finished goods storage (outbound logistics), distribution to customers (outbound logistics).

  Furthermore, although processing orders is relatively effective, customers feel uninformed in the period between order

  placement and order fulfilment.

  Some technological solutions here might include:

  To introduce technology to support the planning and co-ordinating of deliveries so that delivery vans are used more efficiently

  and effectively. This might simultaneously increase the likelihood of customers being at home to receive deliveries. The

  products being delivered are bulky and valuable and so it is vital that someone is available at the delivery address to receive

  them. Failed deliveries are running at 30%, and this leads to increased inventory holding costs associated with storing the

  returned item at the warehouse, higher administrative costs of arranging a re-delivery and extra costs of actually making that

  re-delivery. Technology could be used to improve van utilisation (route planning software) as well as increasing the chance

  of a customer being at home (automated emails to the customer, automated text messages confirming delivery that day,

  perhaps confirming likely delivery time).

  Part of the delivery problem is caused by the failure to continually inform customers about the progress of their order. The

  processing and payment for the goods appears to go quite smoothly and an estimated delivery date is given to the customer

  at the time of order. However, the customer receives no further information until an actual delivery date is confirmed by

  telephone less than one week before the planned delivery. Many actual delivery dates are not the same as the original

  estimated delivery date because of procurement issues. Some customers cannot make this new date (often after keeping the

  original date free) and so a new date has to be negotiated (an administration cost) and this often leads to the finished product

  being stored for longer (increasing inventory cost). An IT system that allows the customer to track their orders; updates likely

  delivery dates as they become available and gives the customer some feeling of progress and involvement would increase

  customer satisfaction and, by increasing the chance of achieving target delivery dates, reduce inventory cost and other

  expenses.

  22Customers have also complained about the absence of after-sales service. Using technology to provide answers to frequently

  asked questions (how do I get stains out of the upholstery), make and handle complaints and order replacement materials

  (particularly textiles) would appear to be beneficial. Service should help retain customers. Newsletters, special offers for

  established customers and targeted emails should also boost customer retention.

【2016年ACCA(P3)考试模拟真题答案】相关文章:

2016年ACCA(P3)考试模拟真题12-05

2016年ACCA(P1)考试模拟真题12-05

初级出版考试模拟真题答案05-11

2017跟单员考试模拟真题(附答案)06-30

2017外贸跟单员考试模拟真题答案06-12

2017跟单员考试模拟真题及答案11-12

跟单员考试模拟真题及答案201711-08

ACCA《财务会计》真题及答案11-02

2017年跟单员考试模拟真题(含答案)07-18